Testing by Standard
Explore the mechanical-testing standards our universal testing machines, specimen-preparation systems, grips and fixtures support — across metals, plastics, composites, paper, textiles and more. Search by code or browse by standards organization.
ISO 125
- ISO 1:2022 — Standard reference temperature (20 °C) for geometrical and dimensional specifications
- ISO 10275: Tensile strain hardening exponent (n-value) for metal sheet and strip
- ISO 10319 Wide-width Tensile Test for Geosynthetics
- ISO 10350-1:2025 — Plastics: comparable single-point data for moulding materials
- ISO 10555-1:2023 Intravascular Catheters (Sterile, Single-Use) — General Requirements
- ISO 10606:1995 — Total elongation at maximum force (reinforcing steel tensile test)
- ISO 11403 — Comparable multipoint data for plastics
- ISO 11566 — Carbon fibre single-filament tensile properties
- ISO 1184: Tensile properties of plastic films (withdrawn)
- ISO 12048 Packaging Compression and Stacking Tests (Compression Tester)
- ISO 12192 Ring Crush (RCT) Compressive Strength Test for Paper and Board
- ISO 12236 Static puncture (CBR) test for geosynthetics
- ISO 12625-4 — Tensile strength, stretch, and tensile energy absorption for tissue
- ISO 12625-5 Wet Tensile Strength (Tissue Paper & Tissue Products)
- ISO 13802 — Verification of Pendulum Impact-Testing Machines (Charpy, Izod, Tensile Impact)
- ISO 13934-1 Tensile Properties of Fabrics (Strip Method)
- ISO 13934-2 (Grab Method) — Fabric Maximum Force Tensile Test
- ISO 13937-2 (Trouser Tear) — Tear Force of Textile Fabrics
- ISO 14125 — Flexural Properties of Fibre-Reinforced Plastic Composites
- ISO 14126 — In-plane compression testing of fibre-reinforced plastic composites
- ISO 14129 — In-plane shear properties of fibre-reinforced plastic composites (±45° tension method)
- ISO 14130 (Short-beam): Apparent Interlaminar Shear Strength (ILSS) of Fibre-Reinforced Plastic Composites
- ISO 14556 – Instrumented Charpy V-Notch Pendulum Impact Test (Metals)
- ISO 148-1 Charpy Pendulum Impact Test (Metals) — Test Method
- ISO 148-2 — Verification of Charpy pendulum impact testing machines
- ISO 148-3 — Charpy V-notch reference test pieces for pendulum impact machine verification
- ISO 148:1983 — Steel Charpy V-Notch Impact Test
- ISO 14879-1: Endurance (fatigue) testing of knee tibial trays
- ISO 15024:2023 — Mode I interlaminar fracture toughness (GIC) using DCB testing
- ISO 15579: Metallic materials — Tensile testing at low temperature
- ISO 15630-1 Testing (Reinforcing Bars, Rods, and Wire)
- ISO 15630-2 (Welded Fabric & Lattice Girders) Testing
- ISO 15630-3 Prestressing Steel Test Methods (Reinforcement & Prestressing of Concrete)
- ISO 15754 (Paper & board): Z-directional tensile strength (ZDT) test
- ISO 16770 (FNCT): Environmental stress cracking of polyethylene
- ISO 16808 Bulge Test for Biaxial Stress–Strain (Optical Measurement)
- ISO 17282: Plastics — Guide to the acquisition and presentation of design data
- ISO 178 Flexural Properties of Plastics (3-Point Bending)
- ISO 179 (Charpy impact strength for rigid plastics) – Standard Overview
- ISO 179-1 — Charpy impact strength of plastics (non-instrumented impact test)
- ISO 179-2 Instrumented Charpy Impact Test for Plastics
- ISO 1798 Testing (Tensile Strength & Elongation) for Flexible Polymeric Foams
- ISO 180: Plastics — Izod impact strength (pendulum impact test)
- ISO 1827 — Shear modulus and adhesion to rigid plates (quadruple-shear)
- ISO 18352 Compression-After-Impact (CAI) Testing for Carbon-Fibre Composites
- ISO 18872: Plastics — Tensile properties at high strain rates
- ISO 1924 (Withdrawn) Paper & Board Tensile Strength Testing
- ISO 1924-2 — Tensile properties of paper and board (20 mm/min)
- ISO 1924-3 — Tensile Properties of Paper & Board (100 mm/min CRE)
- ISO 1974: Paper Tear Resistance (Elmendorf Method)
- ISO 19819: Metallic materials — Tensile testing in liquid helium
- ISO 2307 Fibre Rope Physical & Mechanical Property Testing
- ISO 252:2023 — Conveyor Belts: Adhesion Between Constitutive Elements
- ISO 26203-2 High Strain Rate Tensile Testing (Servo-Hydraulic and Related Systems)
- ISO 283: Textile conveyor belt tensile strength and elongation test method
- ISO 3035 Flat Crush Resistance Test for Corrugated Fibreboard
- ISO 3037: Edgewise Crush Resistance (ECT) of Corrugated Fibreboard
- ISO 3108 Steel Wire Ropes — Determination of Measured Breaking Force
- ISO 3384-1: Stress relaxation in compression (constant temperature)
- ISO 3386-1 — Compression stress/strain characteristics for low-density flexible cellular materials
- ISO 3386-1: Low-density flexible foam compression stress–strain testing
- ISO 3386-2: Compression stress–strain for high-density flexible cellular polymeric materials
- ISO 34 (Tear Strength of Vulcanized Rubber — Trouser, Angle & Crescent)
- ISO 34-1 Tear Strength Testing for Rubber (Trouser, Angle, Crescent)
- ISO 34-2:2022 — Tear strength of vulcanized or thermoplastic rubber (small Delft test pieces)
- ISO 3506-1 Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners (Part 1)
- ISO 3506-2: Mechanical properties of corrosion-resistant stainless steel nuts
- ISO 37 Rubber Tensile Stress–Strain Properties Testing
- ISO 37-1 (Rubber Tensile Stress–Strain Properties)
- ISO 376 (Force-Proving Instrument Calibration for Uniaxial Testing Machines)
- ISO 3781: Wet tensile strength of paper and board after water immersion
- ISO 3800: Axial Load Fatigue Testing of Threaded Fasteners
- ISO 4506 (Hardmetals — Compression test)
- ISO 4545-2 — Knoop hardness testing machine verification and calibration
- ISO 4606 — Textile glass woven fabric tensile breaking force & elongation (strip method)
- ISO 4662 Rebound Resilience Testing for Rubber
- ISO 4674-2: Tear resistance of rubber- or plastics-coated fabrics (ballistic pendulum)
- ISO 527 — Tensile Properties of Plastics (ISO 527 Series)
- ISO 527-1 Plastics Tensile Properties Testing (General Principles)
- ISO 527-2 — Tensile Properties of Plastics (Test Conditions for Moulding and Extrusion Plastics)
- ISO 527-3 — Tensile properties of plastic films and sheets (test conditions)
- ISO 527-4 Tensile Test Conditions for Fibre-Reinforced Plastic Composites
- ISO 527-5 Tensile Testing for Unidirectional Fibre-Reinforced Polymer Composites
- ISO 5628:2019 — Bending stiffness of paper and board (2-point, 3-point, 4-point)
- ISO 604 — Compressive Properties of Plastics (Compression Test Method)
- ISO 6259-1 Tensile Properties of Thermoplastics Pipes (General Test Method)
- ISO 6259-2 Tensile Properties Testing for PVC Thermoplastics Pipes
- ISO 6259-3 — Tensile properties of polyolefin thermoplastics pipes
- ISO 6383-2 — Elmendorf tear resistance for plastic film and sheeting
- ISO 6506-1 Brinell Hardness Test (Metallic Materials) — Test Method
- ISO 6603-2 — Instrumented puncture impact testing of rigid plastics
- ISO 6892-1 Tensile Testing of Metallic Materials (Room Temperature)
- ISO 6892-1: Tensile Testing of Metallic Materials (Room Temperature)
- ISO 6892-2 Tensile Testing of Metallic Materials at Elevated Temperature
- ISO 7206-13 – Torque resistance of hip prosthesis head fixation
- ISO 7206-4: Endurance testing of stemmed femoral components
- ISO 7438 Bend Test for Metallic Materials
- ISO 7500-1 — Calibration & verification of static uniaxial testing machines (force measurement)
- ISO 7500-1:2018 — Calibration & Verification of Force-Measuring Systems (Tension/Compression Testing Machines)
- ISO 7743:2017 Rubber Compression Stress-Strain Properties
- ISO 7763: Compressive strength (S-shape) test for paper and board
- ISO 7800: Metallic materials — Wire — Simple torsion test
- ISO 8067 — Tear Strength of Flexible Cellular Polymeric Materials
- ISO 815-1 Compression Set Testing for Vulcanized or Thermoplastic Rubber (Ambient/Elevated)
- ISO 815-2 Compression Set of Rubber at Low Temperatures
- ISO 8256 (Plastics) — Determination of Tensile-Impact Strength
- ISO 844 — Compression properties of rigid cellular plastics
- ISO 8491 — Tube (Full Section) Bend Test for Metallic Materials
- ISO 8496 Ring Tensile Test for Metallic Tubes
- ISO 8513: GRP pipes — initial longitudinal tensile strength
- ISO 8521 (GRP pipes) — circumferential (hoop) tensile wall strength test methods
- ISO 898-1 (Fastener Mechanical Properties for Bolts, Screws, and Studs)
- ISO 898-1: Mechanical properties of carbon and alloy steel bolts, screws, and studs
- ISO 898-2 (Nuts) — Mechanical & Physical Properties by Property Class
- ISO 899-1 (Plastics — Tensile creep)
- ISO 899-2: Plastics flexural creep by three-point loading
- ISO 9073-4 Tear Resistance (Trapezoid) for Nonwovens
- ISO 9290: Woven fabric tear resistance (falling pendulum method)
- ISO 9513 — Calibration of extensometer systems for uniaxial testing
- ISO 9854-1:2023 — Charpy impact properties for thermoplastic fluid-transport pipes (Part 1)
- ISO 9854-2 — Charpy impact test conditions for thermoplastics pipes
- ISO 9895 — Short-span compressive strength (SCT) of paper and board
- ISO/DIS 18989: Strain-rate dependent tensile tests for thermoplastics
- ISO/TS 18625:2017 — Container Tracking and Monitoring Systems (CTMS) Requirements
- ISO/TS 6892-5 Tensile Testing of Miniaturised Metallic Test Pieces
ASTM 90
- ASTM A1061/A1061M Multi-Wire Steel Prestressing Strand Testing
- ASTM A370 Mechanical Testing of Steel Products
- ASTM A416/A416M: Low-Relaxation Seven-Wire Steel Strand for Prestressed Concrete
- ASTM A931 Tension Testing of Wire Ropes and Strand
- ASTM A938 Torsion Testing of Wire
- ASTM B557 Tension Testing for Wrought and Cast Aluminum and Magnesium Alloy Products
- ASTM C109/C109M Compressive Strength of Hydraulic Cement Mortars
- ASTM C1550 Flexural Toughness of Fiber-Reinforced Concrete
- ASTM C170/C170M: Compressive Strength of Dimension Stone
- ASTM C297/C297M Flatwise Tensile Strength of Sandwich Constructions
- ASTM C305 Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
- ASTM C365/C365M Flatwise Compressive Properties of Sandwich Cores
- ASTM C367/C367M Testing for Acoustical Ceiling Panels
- ASTM C39/C39M Compression Testing of Cylindrical Concrete Specimens
- ASTM C42/C42M Testing for Drilled Concrete Cores and Sawed Beams
- ASTM C617/C617M Standard Practice for Capping Cylindrical Concrete Specimens
- ASTM C633 Thermal Spray Coating Adhesion and Cohesion Testing
- ASTM C78/C78M Flexural Strength of Concrete Testing
- ASTM C880/C880M Flexural Strength Testing for Dimension Stone
- ASTM C99/C99M – Modulus of Rupture of Dimension Stone
- ASTM D1037 – Test Methods for Wood-Base Fiber & Particle Panel Materials
- ASTM D1054 Rubber Resilience (Goodyear-Healey Rebound Pendulum)
- ASTM D1424 Tearing Strength of Fabrics (Elmendorf Pendulum)
- ASTM D1621 Compressive Properties of Rigid Cellular Plastics
- ASTM D1708 — Tensile Properties of Plastics (Microtensile Specimens)
- ASTM D1822 Tensile-Impact Resistance of Plastics
- ASTM D1922 Propagation Tear Resistance (Elmendorf) for Plastic Film
- ASTM D2105 – Longitudinal tensile properties of fiberglass (RTRP/RPMP) pipe and tube
- ASTM D2290 Apparent Hoop Tensile Strength of Plastic Pipe (Split Disk / Ring Segment)
- ASTM D2344/D2344M Short-Beam Strength (Short-Beam Shear) Test for Polymer Matrix Composites
- ASTM D2412 — Plastic Pipe Stiffness by Parallel-Plate Loading
- ASTM D256 — Izod Pendulum Impact Resistance of Plastics
- ASTM D2990 — Creep and creep-rupture testing of plastics (tension, compression, and flexure)
- ASTM D3039/D3039M – Tensile Properties of Polymer Matrix Composite Materials
- ASTM D3330/D3330M — Peel Adhesion of Pressure-Sensitive Tape
- ASTM D3410/D3410M — Compressive Properties of Polymer Matrix Composites by Shear Loading
- ASTM D3518/D3518M — In-plane shear response of polymer matrix composites (±45° tensile laminate)
- ASTM D3763 — High-Speed Puncture Properties of Plastics (Instrumented Impact)
- ASTM D3763-02 High Speed Puncture Properties of Plastics (Instrumented Impact)
- ASTM D395 Compression Set Testing (Rubber & Elastomers)
- ASTM D412 Tensile Test Methods for Vulcanized Rubber & Thermoplastic Elastomers
- ASTM D430 Rubber Deterioration — Dynamic Fatigue (Flex Fatigue)
- ASTM D5034 Grab Tensile Test for Textile Fabrics
- ASTM D5035 – Breaking Force & Elongation of Textile Fabrics (Strip Method)
- ASTM D5379/D5379M – Shear Properties of Composite Materials (V-Notched Beam)
- ASTM D5528 (DCB) Mode I Interlaminar Fracture Toughness of Composites
- ASTM D573 Rubber Air-Oven Aging (Deterioration) Test Method
- ASTM D5734 — Tearing Strength of Nonwoven Fabrics (Elmendorf / Falling-Pendulum)
- ASTM D5748 Protrusion Puncture Resistance of Stretch Wrap Film
- ASTM D5868 Lap Shear Adhesion for FRP Bonding (Test Method)
- ASTM D6110 Charpy Impact Resistance of Notched Plastics
- ASTM D624 Tear Strength Testing (Rubber & TPE)
- ASTM D6272 Four-Point Flexural Properties of Plastics (Test Method)
- ASTM D638 – Standard Test Method for Tensile Properties of Plastics
- ASTM D6484/D6484M – Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
- ASTM D6641/D6641M – Compressive Properties of Polymer Matrix Composites (CLC Fixture)
- ASTM D6742/D6742M Filled-Hole Tension & Compression Testing (Polymer Matrix Composites)
- ASTM D695 — Compressive Properties of Rigid Plastics (Compression Test Method)
- ASTM D7078/D7078M — V-Notched Rail Shear Test for Composite Shear Properties
- ASTM D7121 Rubber Resilience (Schob Rebound Pendulum) Test Method
- ASTM D7136/D7136M — Drop-Weight Impact Damage Resistance of Polymer Matrix Composites
- ASTM D7137/D7137M — Compression After Impact (CAI) / Compressive Residual Strength of Damaged Composite Plates
- ASTM D7192 — High-Speed Puncture Properties of Plastic Films
- ASTM D7264 (D7264/D7264M) — Flexural Properties of Polymer Matrix Composite Materials
- ASTM D790 — Flexural (3-Point Bend) Properties of Plastics
- ASTM D7905 / D7905M – Mode II Interlaminar Fracture Toughness (ENF) of UD Composites
- ASTM D828 — Tensile Properties of Paper and Paperboard (CRE Method)
- ASTM D882 (D882-26) — Tensile Properties of Thin Plastic Sheeting
- ASTM E1012: Verification of Testing Frame & Specimen Alignment
- ASTM E139 — Creep, Creep-Rupture, and Stress-Rupture Testing of Metallic Materials
- ASTM E143 — Shear Modulus at Room Temperature (Test Method)
- ASTM E190 Guided Bend Test for Ductility of Welds
- ASTM E21 Elevated-Temperature Tensile Testing of Metallic Materials
- ASTM E2248 – Impact Testing of Miniaturized Charpy V-Notch (MCVN) Specimens
- ASTM E2298: Instrumented Impact Testing of Metallic Materials (Instrumented Charpy)
- ASTM E23 — Notched Bar Impact Testing of Metallic Materials (Charpy & Izod)
- ASTM E290 Bend Testing of Material for Ductility
- ASTM E345 – Tension Testing of Metallic Foil
- ASTM E4-24 Force Calibration and Verification of Testing Machines
- ASTM E436 Drop-Weight Tear Test (DWTT) for Ferritic Steels
- ASTM E488/E488M – Strength of Anchors in Concrete Elements
- ASTM E646: Tensile Strain‑Hardening Exponent (n‑Value) for Metallic Sheet
- ASTM E74 (Class AA) — Force-measuring instrument calibration for reference standards
- ASTM E8/E8M – Tension Testing of Metallic Materials
- ASTM E83: Calibration, verification, and classification of extensometer systems
- ASTM E9 Compression Testing of Metallic Materials (Room Temperature)
- ASTM F1306 — Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
- ASTM F606 / F606M Fastener Mechanical Testing
- ASTM F606-02 Fastener Mechanical Testing (Bolts, Nuts, Washers, Rivets)
- ASTM F606/F606M — Mechanical Testing of Threaded Fasteners, Washers, DTIs, and Rivets
EN 56
- EN 10002-1 — Tensile testing of metallic materials (ambient temperature)
- EN 10045 — Charpy Impact Test (Metallic Materials)
- EN 10080 — Weldable reinforcing steel for concrete (general requirements)
- EN 10138 (Prestressing steels) – requirements for prestressing steel products
- EN 1023-3 Office furniture screens — test methods
- EN 10232 Tube (Full Section) Bend Test
- EN 10237 Ring Tensile Test for Metallic Tubes
- EN 10274 – Metallic materials: drop weight tear test (DWTT)
- EN 10328: Depth of hardening after surface heating (conventional method)
- EN 1043 — Hardness testing of welded joints (metallic materials)
- EN 12390-3 — Compressive Strength of Hardened Concrete Test Specimens
- EN 12504-1 — Testing Concrete in Structures (Cored Specimens)
- EN 12562: Para-aramid multifilament yarns — test methods
- EN 12697-12 Water Sensitivity of Bituminous Specimens
- EN 12697-23 – Indirect tensile strength of bituminous specimens
- EN 12697-34 Marshall Test for Bituminous Mixtures
- EN 1288 – Determination of the bending strength of glass
- EN 13279-2 Test Methods for Gypsum Binders and Gypsum Plasters
- EN 1337-5 Structural Bearings — Pot Bearings
- EN 1393 – Initial longitudinal tensile properties of GRP pipes
- EN 1394 — GRP pipe apparent initial circumferential tensile strength
- EN 14477 — Puncture resistance test for flexible packaging materials
- EN 1492 — Textile slings (safety series)
- EN 1669 Earing Test for Aluminium Sheet and Strip
- EN 196-1 (Cement) – Determination of Strength (Compressive / Flexural)
- EN 196-6 — Methods of testing cement: Determination of fineness
- EN 196-8 (Heat of hydration — solution method)
- EN 21974 Tearing Resistance (Elmendorf Method) for Paper
- EN 2377 — Apparent Interlaminar Shear Strength (GFRP) Test Method
- EN 24506 Hardmetals — Compression Test
- EN 2562 – Flexural test (parallel to fibre direction) for unidirectional carbon fibre composites
- EN 2563 — Apparent Interlaminar Shear Strength (ILSS) of Unidirectional CFRP
- EN 2746 Flexural Test (Three-Point Bend) for Glass Fibre Reinforced Plastics
- EN 2850 — Compression test parallel to fibre direction (UD carbon fiber composites)
- EN 311 — Surface soundness test method for wood-based panels
- EN 319 — Tensile strength perpendicular to the plane (internal bond) for wood-based panels
- EN 320 Screw Withdrawal Resistance (Particleboards & Fibreboards)
- EN 455-2: Medical gloves for single use — physical properties requirements & testing
- EN 459-2: Building lime — Part 2: Test methods
- EN 480-2: Determination of setting time (admixtures for concrete, mortar and grout)
- EN 491 — Test methods for concrete roofing tiles and fittings
- EN 538 — Flexural strength test for clay roofing tiles
- EN 6033: Mode I interlaminar fracture toughness (GIC) test for CFRP
- EN 6034 — Mode II interlaminar fracture toughness (GIIC) for carbon-fibre composites
- EN 6060 — Tensile single lap shear strength (bonded fibre reinforced plastics)
- EN 7 (Determination of Ash from Petroleum Products)
- EN 71 (Safety of Toys) Standard Series
- EN 826 — Determination of Compression Behaviour (Thermal Insulation Products)
- EN 843-1: Flexural Strength of Advanced Technical Ceramics (Room Temperature)
- EN 895 — Transverse tensile test for welded butt joints
- EN 910 — Bend Testing of Welded Joints (Metallic Materials)
- EN ISO 13937-1 Elmendorf Tear Force Test for Textile Fabrics
- EN ISO 15630-1 Test Methods for Reinforcing Bars, Rods and Wire
- EN ISO 6508 (Rockwell hardness test for metallic materials)
- EN ISO 679 Cement — Test methods — Determination of strength
- EN-002 Standard
DIN 43
- DIN 488-1:2009-08 — Reinforcing steels — Part 1: Grades, properties, marking
- DIN 50106 Compression Test at Room Temperature
- DIN 50111 Bend Test (Metallic Materials)
- DIN 50115 — Notched-Bar Impact Test (Special Specimens & Evaluation)
- DIN 50125 — Tensile test pieces for metallic materials
- DIN 50136: Flattening (Ring Fold) Test on Metallic Tubes
- DIN 50138 Ring Tensile Test on Tubes (Withdrawn)
- DIN 5014 (S-test): Compressive strength of paper and board using an S-shaped specimen
- DIN 50141 Shear Test for Metallic Materials
- DIN 50151 — Spring strip bend test (fine measurement)
- DIN 50154 Tensile Testing of Aluminum Foils and Thin Strip
- DIN 51222 — Pendulum impact testing machines (≤ 50 J) requirements and verification
- DIN 51306 — Verification of Pendulum Impact Testing Machines
- DIN 52186 — Wood Bending Test (Flexural Properties)
- DIN 53128 — Elmendorf Tearing Resistance (Paper)
- DIN 53142-1 — Testing of Board: Puncture Test (Pendulum Method)
- DIN 53142-2 Puncture Test for Board (Linear Move)
- DIN 53504 Tensile Testing of Rubber and Elastomers (Stress–Strain Properties)
- DIN 53512 — Rebound resilience of rubber (Schob pendulum)
- DIN 53799 — Decorative laminated sheets based on aminoplastic resins (test methods)
- DIN 53835-2 — Tenso-elastic behavior of elastomeric yarns (repeated tensile loading)
- DIN 53835-3 — Elastic behavior of yarns under a single tensile loading cycle
- DIN 53862 — Elmendorf Tear Resistance of Woven Fabrics (Falling Pendulum)
- DIN 54518 — Short-span compression strength (SCT) for paper and board
- DIN 969 – Axial load fatigue testing for threaded fasteners
- DIN EN 1023 — Office furniture screens (partitions): dimensions, mechanical safety, and test methods
- DIN EN 10274 Drop Weight Tear Test (DWTT)
- DIN EN 12562: Para-aramid Multifilament Yarns — Test Methods
- DIN EN 455-2 — Medical Gloves for Single Use (Physical Properties)
- DIN EN 895 — Transverse Tensile Test for Welded Joints (Withdrawn)
- DIN EN 910: Bend tests for welds in metallic materials
- DIN EN ISO 14556 – Instrumented Charpy V-Notch Pendulum Impact Test
- DIN EN ISO 148-1 Charpy Pendulum Impact Test (Metals) – Test Method
- DIN EN ISO 148-2 — Verification of Charpy Pendulum Impact Testing Machines
- DIN EN ISO 26203-2 — High Strain-Rate Tensile Testing (Servo-Hydraulic Systems)
- DIN EN ISO 376 – Calibration of force-proving instruments for uniaxial testing machines
- DIN EN ISO 6892-1 — Tensile testing of metallic materials at room temperature
- DIN EN ISO 6892-2 — Tensile testing of metallic materials at elevated temperature
- DIN EN ISO 7500-1 — Calibration & Verification of Force Measurement for Tension/Compression Test Machines
- DIN EN ISO 9513 – Calibration of extensometer systems for uniaxial testing
- DIN ISO 4506 — Hardmetals (cemented carbide) compression test
- DIN ISO 815-1 — Compression Set Testing for Vulcanized & Thermoplastic Rubber
- DIN ISO 815-2 — Compression Set at Low Temperatures (Rubber)
GB/T 14
- GB/T 1043.1-2008 — Plastics: Charpy Impact Properties (Non‑Instrumented Impact Test)
- GB/T 11999 (Elmendorf tear resistance for plastic film and sheeting)
- GB/T 15825.5-2008 — Sheet metal formability (bending test)
- GB/T 1634 — Temperature of Deflection Under Load (HDT/DTUL) for Plastics
- GB/T 16825.1 (Static uniaxial testing machines — force-measuring system calibration & verification)
- GB/T 1843 — Plastics: Determination of Izod impact strength
- GB/T 228 — Metallic Materials Tensile Testing at Ambient Temperature
- GB/T 228.1-2021 — Metallic Materials Tensile Testing (Room Temperature)
- GB/T 230.2 — Rockwell hardness tester & indenter verification and calibration
- GB/T 231.2 — Brinell hardness testing machine verification & calibration
- GB/T 232 — Metallic Materials Bend Testing Method
- GB/T 2951 — Test Methods for Cable Insulation and Sheath Materials
- GB/T 3917.1 — Fabric Tear Force (Elmendorf / Ballistic Pendulum) Test
- GB/T 4340.2 Vickers hardness tester verification and calibration
BS 13
- BS 1006 NEXT 2, 3, 5 (Colour Fastness to Washing & Dry Cleaning)
- BS 131-1 (Izod impact test on metals)
- BS 131-6: Notched bar tests — precision Charpy V-notch impact energies (metals)
- BS 18:1987 — Tensile Testing of Metals (Room Temperature)
- BS 3084: Slide fasteners (zips) — specification
- BS 4449 (BS 4449:2005+A3:2016) – Weldable reinforcing steel for concrete
- BS 4482: Steel wire for reinforcement of concrete products
- BS 4483 steel fabric for the reinforcement of concrete (specification)
- BS 5896: High tensile steel wire and strand for prestressing concrete
- BS 6746:1990 — PVC insulation and sheath materials for electric cables
- BS EN 1337-5 Pot Bearings (Structural Bearings)
- BSS 7260 (Boeing) — Composite Laminate Compression & CAI Testing
- BSS 7273 — Interlaminar fracture toughness (DCB / ENF) for fiber‑reinforced composites
JIS 11
- JIS B 7731 (Shore hardness test — Calibration of reference blocks)
- JIS G 3112 — Steel Bars for Concrete Reinforcement
- JIS K 7128-2 — Elmendorf Tear Resistance of Plastic Film & Sheeting
- JIS K 7210 — Melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics
- JIS P 8116 Paper — Tearing Resistance (Elmendorf Method)
- JIS Z 2201 (Tensile test pieces for metallic materials)
- JIS Z 2204 — Bend Test Pieces for Metallic Materials
- JIS Z 2241 — Tensile Testing of Metallic Materials at Room Temperature
- JIS Z 2242 — Charpy Pendulum Impact Test (Metals)
- JIS Z 2243 — Brinell Hardness Test (HBW) for Metallic Materials
- JIS Z 2248 Bend Test for Metallic Materials
TAPPI 8
- TAPPI T 231 (cm) — Zero-span breaking strength of pulp (dry zero-span tensile)
- TAPPI T 414 — Internal Tearing Resistance of Paper (Elmendorf-Type Method)
- TAPPI T 456 Wet Tensile Strength (Water-Saturated Paper & Paperboard)
- TAPPI T 541 Internal Bond Strength of Paperboard (Z-Direction Tensile)
- TAPPI T 804 Box Compression Test (Fiberboard Shipping Containers)
- TAPPI T 811 (ECT) — Edgewise Compressive Strength of Corrugated Fiberboard (Short Column Test)
- TAPPI T 826 — Short span compressive strength of containerboard
- TAPPI/ANSI T 494 (Tensile properties of paper and paperboard, CRE method)
AITM 7
- AITM 1-0002 In-Plane Shear Properties (±45° Tensile) for Fibre-Reinforced Plastics
- AITM 1-0005 – Mode I interlaminar fracture toughness energy (GIc) for fiber-reinforced plastics
- AITM 1-0006 (Airbus) — Mode II Interlaminar Fracture Toughness (GIIc)
- AITM 1-0008 Compression Testing of Composite Laminates
- AITM 1-0010 – Compression Strength After Impact (CAI) for Fibre-Reinforced Plastics
- AITM 1-0010 (Airbus) — Compression After Impact (CAI) of Composite Laminates
- AITM 1-0019 — Tensile lap shear strength of composite joints (single lap shear)
NF 2
No standards match your search.