ISO 26203-2 specifies requirements for tensile testing of metallic materials at high strain rates using servo-hydraulic and other suitable high-rate systems. To match a setup to this test, talk with our team.
What ISO 26203-2 Covers
The method addresses tensile testing at strain rates far above quasi-static conditions, where inertia, load-cell ringing, and fast data acquisition become critical. It is used for crash, impact, and dynamic material models.
High-Rate Test Requirements
Reliable high-rate data depends on stiff, low-mass fixturing, force measurement that avoids ringing, and high-speed strain measurement such as optical methods. The standard sets out how to control and report these.
Preparing Specimens
Specimen geometry is tuned to the high-rate system and gripping. To scope a high strain-rate tensile setup, request a quote.
Reading the Designation
Cited as ISO 26203-2:YYYY. Confirm the edition and the strain-rate range.
Related Standards
DIN EN ISO 26203-2 is the German adoption, and ISO 6892-1 is the quasi-static room-temperature method.
Request a Quote
Setting up high strain-rate tensile testing? Request a quote and our team will help you build a system matched to your strain-rate range and specimen type.
TensileMill CNC products for ISO 26203-2
Our specimen-preparation systems and testing equipment compatible with ISO 26203-2:
TensileMill CNC MICRO – Precision Flat Tensile & Impact Micro Machine
MICRO – Precision Flat Tensile & Impact Sample Preparation
TensileTurn CNC – Industrial Upgrade – Round Tensile Sample Preparation Machine
Industrial Upgrade – Round Tensile Sample Preparation
Electro Mechanical Universal Testing System 5 kN / 50 kN with Precision Load Cell
Electro-Mechanical UTM · 5 kN / 50 kN with Precision Load Cell
Configure your ISO 26203-2 setup with TensileMill CNC
From specimen preparation to the test itself, TensileMill CNC supports the full ISO 26203-2 testing chain. For this work we supply universal testing machines, wedge or pneumatic grips, and flat and round specimen-preparation systems. Share your material mix and throughput, and we will recommend a setup that fits ISO 26203-2.