← Back to all standards

ISO 15579: Metallic materials — Tensile testing at low temperature

ISO 15579 · ISO standard

Status: withdrawn by the publisher. The current reference is ISO 6892-3.

ISO 15579 is the ISO tensile testing method for metallic materials at low (sub-ambient) temperatures. It adds controlled cooling and cold-temperature measurement to a standard tensile test. To set up low-temperature tensile testing, talk with our team.

What ISO 15579 Covers

The method applies when tensile properties are required below room temperature, such as for cryogenic service and cold-climate applications. It defines how the specimen is cooled, held at temperature, and pulled while the target temperature is maintained.

Reading the Designation

Cited as ISO 15579:YYYY. Confirm the edition and the required temperatures.

Cold-Temperature Setup

The specimen is brought to and held at the target temperature using a cooled chamber or bath, with temperature measured on the gauge section. Extensometry and grips must function reliably at the test temperature.

Properties Reported

Proof or yield strength, tensile strength, and elongation at the low test temperature, used for cryogenic and low-temperature design.

Preparing Specimens

Specimen and grip selection must suit the cold environment. To configure a low-temperature tensile system, request a quote.

Set up ISO 15579 testing with TensileMill CNC

Tell us your materials, specimen forms, and required test sections, and our team will match the right configuration.