ASTM D2344/D2344M Short-Beam Strength (Short-Beam Shear) Test for Polymer Matrix Composites
ASTM D2344 is the test method for the short-beam strength of polymer matrix composites and their laminates. To match this to your program, talk with our team.
What ASTM D2344 Covers
It gives a quick apparent interlaminar shear strength by loading a short, thick beam in three-point bending so that shear between the plies dominates failure.
How the Test Is Run
A short-span specimen is loaded in three-point bending at a controlled rate until it fails, and the short-beam strength is calculated from the peak load and cross-section.
Why It Matters
Short-beam strength is a fast screening indicator of interlaminar quality and cure; a rigid short-span fixture is required.
Reading the Designation
Cited as ASTM D2344 with its edition. Confirm the version and specimen or fixture requirements before finalizing setup. To configure a composite testing setup, request a quote.
TensileMill CNC products for ASTM D2344
Our specimen-preparation systems and testing equipment compatible with ASTM D2344.
Electro Mechanical Universal Testing System 5 kN / 50 kN with Precision Load Cell
Electro-Mechanical UTM · 5 kN / 50 kN with Precision Load Cell
Composite Testing Grips and Fixtures for Tensile, Shear, and Delamination Evaluation
Grips and fixtures for tensile, shear and delamination of composites
Set up ASTM D2344 testing with TensileMill CNC
Tell us your materials, specimen forms, and required test sections, and our team will match the right configuration.